Powerful Drilling, Driving, and Fastening: With enough power to rival professional automotive wrenches, the WH18DFL delivers an impact rate of up to 3,000 BPM, a no-load variable speed of 0-2,500 RPM, and up to 1,150 in./lbs. of torque. For consistency, electronic feedback provides power control, so you get equal torque and RPM in both forward and reverse.
Minimize down-time with this fast and efficient charger from DEWALT. The DC9310 charges every DEWALT 7.2-volt to 18-volt NiCd, NiMH, or Li-Ion battery (with the exception of UniVolt batteries) in about one hour. A helpful LED indicator tells you the charging status (charged, charging, power line problem, replace pack, and battery too hot or too cold), as a three-stage charging system does its work.
Charges Black & Decker batteries (model No. PS120, PS130, and PS140) in 1 hour. 1.0 amp hr. Computerized charging optimizes charging of battery cells.
This is an amazing little charger that literally breathes new life into your failing DeWalt batteries. It revitalizes everything from 9.6 volts through the big 18-volters, but what’s so great about this charger is that not only can it be used as a standard quick charger, but if you leave a worn-down battery in for four to 10 hours, the charger conditions the battery with a tune-up mode, and at completion, it automatically converts to trickle charge, so you’ll never damage a battery by leaving it in the charger too long. Diagnostics with LED indicators give you the battery status at a glance: charged, charging, power line problem, replace pack, and battery too hot or too cold. It’s got a small footprint, which is always a plus, and the price is look-twice-and-rub-your-eyes cheap.
The convenience of using cordless tools can be compromised if you’re always standing around waiting for the batteries to recharge. To get you up and running quicker, with less down time, Black and Decker has developed the FSMVC 9.6-Volt to 18-Volt Fast Charger. This cleverly designed plug-in charger accepts a wide range of nicad batteries, including 9.6, 12, 14.4, and 18-volt packs. And it will recharge a battery in less than 90 minutes, as compared to the average three-hour recharge time of the chargers that came with the tools. The FSMVC 9.6-Volt to 18-Volt Fast Charger accepts all Black and Decker and Firestorm spring-loaded (slide-in) type batteries.
Drives up to 3 1/2 inch nails Hammers easily in tight spaces Eliminates manual hammering Drives common and finish nails No “miss-hits” 3,600 Beats Per Minute JG001 Auto-Hammer 12V Lithium-Ion battery C120D Dual Chemistry Charger Tool Bag Operator′s Manual
?19.2 volt Diehard Drill/Driver
?Powerful 19.2 volt DC motor provides power for most home drilling needs ?Variable Speed (0-400/0-1400 rpm.) lets you match speed to material & job
?Electric brake stops chuck quickly for easier & quicker operation
?3/8 in. keyless chuck allows for quick, simple bit changes; Reversible 2 speed gear box for fast drilling or high torque applications.
The powerful 19.2 volt motor allows for 0-3000 RPM no load speeds and tightening or loosening of various nuts/bolts. The impacting mechanism produces 200 ft. lbs. of torque and 0-3000 impacts per minute to easily drive long screws or lag bolts. Wrench has 1/2 in. anvil with pin retention for easy and secure socket connection. The mid handle design with over-mold ensures balance and comfort while the included auxillary handle provides control when using the drill. Bright LED light illuminates as the trigger is pulled. The LED provides ample light when working in dimly lit conditions. Works with 19.2 volt battery powered by DieHard®. Batteries and charger not included
One-hour charger for Item# 467100, M18 Compact Lithium Ion Battery.
Includes 18V Lithium-Ion Battery & 1-Hour Charger Kit – SC118B-LI, 1-Hour Charger